Australian Diversified Engineering Pty Ltd (ADE) design and manufacture specialised On-Highway Semi-Trailers to your requirements in accordance with the applicable Australian Standards (AS), Australian Design Rules (ADR's) and Codes of Practice
The trailer's load restraint systems were designed by Loadsafe Australia Pty Ltd.
TRAILER SPECIFICATIONS
Dimensions
|
Length
|
13,500mm
|
|
Skidplate Height
|
1,250mm
|
|
Kingpin
|
1,300mm from front
|
|
Suspension
|
10,400mm to centre of tandem
|
Frame
All welding performed in accordance with AS/NZS 1554 Part 1 - Category SP.
|
Rear Under-run
|
Square - 100 x 100 x 9mm RHS
|
|
Skidplate
|
10mm with 50mm bolt-in kingpin
|
|
Base Frame
|
950mm main rail centres
|
|
Floor
|
18mm marine grade ply wood retained with s/steel counter-sunk bolts
|
|
Coaming
|
75 x 50 x 6mm RHS with 20mm square on top and flush with floor
|
Suspension
BPW Tandem Axle Airbag Suspension - Model SLM D36
Axles & Brakes
BPW HXZ9100-15 Axles - Dual spider, grease lubrication, with Bendix manual slack adjusters and drum brake
Wheels & Tyres
|
Wheels
|
Mullins 8.25 x 22.5 Spider Rim
|
|
Tyres
|
Michelin XTE2-11R22.5
|
Load Restraint
Trailer designed for use with Loadsafe Australia Pty Ltd load restraint components
|
Bolsters
|
3 x 100mm square hardwood
|
|
Stanchions
|
8 x 1480mm high removable - stored under trailer floor
|
|
Gates
|
10 x Aluminium sheeted hinged gates
|
|
Gates Latching
|
Fixed and swing pillars with integral latching system
|
|
Tie-down Points
|
11 x RUD VLBS-4 installed flush with trailer floor
|
|
Tie Rails
|
25mm NB Pipe both sides
|
|
Headboard
|
1,190mm high
|
|
Tailboard
|
800mm high
|
Electrical
|
Voltage 24VDC to ADR 13
10 x LED Clearance Lights
4 x LED Side Indicators
4 x LED Tail Lights
2 x Number Plate Lights
|
Landing Gear
Standard Foot: 2-speed
Surface Preparation & Protection
|
Sandblasting
|
Sandblasting to AS1627.4 Class 2.5
|
|
Paint
|
Zinc Primer (75 micron) & 2K Urethane (75 micron)
|
Safety Features
|
Retractable stairs with folding handrail at rear
Side under-run protection to prevent cyclists, motorcyclists and small vehicles from being propelled under the trailer in a collision. Both front and rear-most mountings are supported by the side under-run structure.
|
Mudguards
Black plastic mudguards with curved spray arch skirt
Optional Extras
Knorr Bremse Electronic Braking System - EBS
